Skocz do zawartości
Forum Android | CyanMod

Jak zwiększyć pamięć wewnętrzną ? (sdcard --> extsd)


Veeon

Rekomendowane odpowiedzi

Da sie to zamienić??? Mój LG L65 ma tylko 1,5 gb wbudowanej.

# Copyright © 2012, The Linux Foundation. All rights reserved.

#

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions are

# met:

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above

# copyright notice, this list of conditions and the following

# disclaimer in the documentation and/or other materials provided

# with the distribution.

# * Neither the name of The Linux Foundation nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

#

# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED

# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT

# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS

# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

/devices/msm_sdcc.2/mmc_host auto vfat defaults voldmanaged=external_SD:auto

Odnośnik do komentarza
Udostępnij na innych stronach

Da sie to zamienić??? Mój LG L65 ma tylko 1,5 gb wbudowanej.

# Copyright © 2012, The Linux Foundation. All rights reserved.

#

# Redistribution and use in source and binary forms, with or without

# modification, are permitted provided that the following conditions are

# met:

# * Redistributions of source code must retain the above copyright

# notice, this list of conditions and the following disclaimer.

# * Redistributions in binary form must reproduce the above

# copyright notice, this list of conditions and the following

# disclaimer in the documentation and/or other materials provided

# with the distribution.

# * Neither the name of The Linux Foundation nor the names of its

# contributors may be used to endorse or promote products derived

# from this software without specific prior written permission.

#

# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED

# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT

# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS

# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

/devices/msm_sdcc.2/mmc_host auto vfat defaults voldmanaged=external_SD:auto

wbudowana ma 4gb z tym ze 2gb jest dla uzytkownika... kup karte pamieci i rozszerz ją... no i aplikacje przerzuć na SD

  • Lubię to 1
Odnośnik do komentarza
Udostępnij na innych stronach

  • 2 miesiące temu...

do cm11 musisz dodać linijki (2 chyba) do bulid.prop

w mojej sygnaturce masz łatwiejsze rozwiązanie ;)

  • Lubię to 1
Odnośnik do komentarza
Udostępnij na innych stronach

  • 1 miesiąc temu...

Witam

Potrzebuje pomocy z plikiem vold.fstab w Samsung Galaxy Trendy Plus . Edytowalem na setki sposobow i niestety po restarcie telefonu poprostu sie nie uruchamia ,co skutkuje ponownym instalowaniem systemu. Bardzo prosze o pomoc i z gory dziekuje za odpowiedz.

Witam

Po edycji pliku vold.fstab może być, podobnie jak w moim chińczyku (no name - obecnie F10B_Firmware_20121128 od "MAPAN" i 32GB sdcard), konieczny twardy restart. Trzymasz przycisk power aż system "zdechnie", czekasz ok. 15 sekund i włączasz zasilanie, modląc się o start. Przyznam że omal nie zajechałem ekranu zmieniając po raz kolejny linijek vold.fstab. Teraz mam to wgrane do FW razem ze zmianą DPI w /system/build.prop oraz ładniejszym :D bootlogo.

Odnośnik do komentarza
Udostępnij na innych stronach

  • 2 tygodnie później...

A masz pamięć wewnętrzną? To znaczy czy posiadasz /sdcard0 i /sdcard1? Bo mnie się wydaje że nie, więc to troche sensu nie ma

Odnośnik do komentarza
Udostępnij na innych stronach

musi pomóc Ci ktoś z HTC, te urządzenia Tajwańczyków chyba mają trochę inne ścieżki 

Odnośnik do komentarza
Udostępnij na innych stronach

  • 2 tygodnie później...

Witam posiadam LG L FINO I u mine plik vold.fstab wygląda tak :

 

# Copyright © 2012, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above
#       copyright notice, this list of conditions and the following
#       disclaimer in the documentation and/or other materials provided
#       with the distribution.
#     * Neither the name of The Linux Foundation nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

/devices/msm_sdcc.2/mmc_host     auto      vfat    defaults    voldmanaged=external_SD:auto

 

Co mam zamienić miejscami aby karta pamięci była pamięcią telefonu ?

Odnośnik do komentarza
Udostępnij na innych stronach

  • 1 miesiąc temu...

A jeżeli mam tak : 

#dev_mount sdcard /storage/sdcard auto / devices/platform/mmc_host/mmc2dev_mount sdcard / storage/extSdCard auto / devices/pratform/sdhci.0/mmc_host/mmc2

To co i jak mam zmienić. Bo jak zrobiłem tak:

#dev_mount sdcard /storage/extSdCard auto / devices/platform/mmc_host/mmc2dev_mount sdcard / storage/sdcard auto / devices/pratform/sdhci.0/mmc_host/mmc2

To po takiej zmianie na logo sie wszystko zatrzymało i dalej nic. Mam zrobionego tylko root'a nic więcej, żadnego innego roomu ani nic nie mam wgranego ;)

 

Więc po tym co zrobiłem up wgrałem na nowo system przez odina i wgl i zrobiłem jeszcze jedną podmiankę:

#dev_mount sdcard /storage/sdcard auto / devices/platform/mmc_host/mmc2dev_mount extSdCard / storage/extSdCard auto / devices/pratform/sdhci.0/mmc_host/mmc2

Teraz telefon włączył się normalnie. Normalnie funkcjonuje lecz nie dało mi to więcej pamięci ani nic z tych rzeczy. Mógłby ktoś coś poradzić? Jak mógłbym to jeszcze zmienić aby zwiększyć sobie pamięć telefonu?

Odnośnik do komentarza
Udostępnij na innych stronach

  • 4 tygodnie później...

mam problem bo u mnie to jest tak że mam nand flash 4.79 i pamieć wewnętrzną 1 gb chciałbym zwiekszyc bo po zainstalowaniu paru gierek zostało 174 mb i pisze że nie ma pamięci próbowałem sam   ale u mnie to wygląda tak  

 

## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
## 
 
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...> 
## label        - Label for the volume
## mount_point  - Where the volume will be mounted
## part         - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
 
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
#dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
#dev_mount flash /mnt/sdcard auto /devices/virtual/mtd/mtd9/mtdblock9
 
dev_mount flash /mnt/sdcard auto /dev/block/mtd/by-name/user /dev/block/platform/emmc/by-name/user
dev_mount sdcard /mnt/external_sd auto /devices/platform/rk29_sdmmc.0/mmc_host/mmc
dev_mount udisk /mnt/usb_storage auto /devices/platform/usb20_host/usb /devices/platform/usb20_otg/usb
 
## Example of a dual card setup
# dev_mount left_sdcard  /sdcard1  auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# dev_mount right_sdcard /sdcard2  auto /devices/platform/goldfish_mmc.1 /devices/platform/msm_sdcc.3/mmc_host/mmc1
 
## Example of specifying a specific partition for mounts
# dev_mount sdcard /sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1
 

 

 

 a jeśli chodzi o tablet to Phillips PI3110B2/58

i ważny fakt że był w naprawie i nie udało się działa tylko funkcja ładowania a czytnik usb nie 

 

czy to zadziała bez usb  proszę o odpowiedz i pomoc jak najszybciej

Odnośnik do komentarza
Udostępnij na innych stronach

  • 2 miesiące temu...

Nie musisz cytować tego posta...

U ciebie raczej nie da się zamienić pamięci tym sposobem. Możesz ewentualnie spróbować tak:

dev_mount sdcard /storage/sdcard0 auto

/devices/msm_sdcc.2/mmc_host

Ale odradzam.

Odnośnik do komentarza
Udostępnij na innych stronach

Dziś "zamienimy miejscami" kartę SD z pamięcią wewnętrzną.

 

Pamiętaj ! Robisz to na własną odpowiedzialność. Nie odpowiadam za żadne usterki !

 

To tak pobieramy najpierw aplikację o nazwie:

File Explorer: https://play.google.com/store/apps/d...=search_result

i do tego "plugin":

File Explorer (Root Add-on): https://play.google.com/store/apps/d...cHAuZngucnIiXQ..

 

 

Następnie wchodzimy do File Explorer'a.

Wchodzimy w:

1. System (root) (trzeba akceptować)

2. Potem wchodzimy do pliku "etc"

3. Na koniec otwieramy plik "vold.fstab" za pomocą edytora tekstu.

 

i tam zamieniamy dwa wiersze: 

 

dev_mount sdcard /mnt/extsd auto

dev_mount extsd /mnt/sdcard auto

 

zamieniamy na:

 

dev_mount sdcard /mnt/sdcard auto

dev_mount extsd /mnt/extsd auto

(TE DWA WIERSZE ZNAJDUJĄ SIĘ DWIE LINIJKI OD DOŁU)

Potem zapisujemy, resetujemy nasz tablet/telefon, i mamy więcej pamięci w telefonie !  :DJeśli coś nie działa, pisz ! Postaram Ci się pomóc. :)

Witam !!!

A co mot zrobić jak mój wiersz wygląda tak:

#dev_mount sdcard /storage/sdcard1 auto /devices/msm_sdcc.2/mmc_host

Pozdrawiam dgt1410

Odnośnik do komentarza
Udostępnij na innych stronach

  • 1 miesiąc temu...

@miettekpl montuj katalogi, bo swapem możesz uceglić urządzenie, xperie nie są swap-friendly

Odnośnik do komentarza
Udostępnij na innych stronach

  • 1 miesiąc temu...

# Copyright (c) 2011, Code Aurora Forum. All rights reserved. 

# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions are 
# met: 
# * Redistributions of source code must retain the above copyright 
# notice, this list of conditions and the following disclaimer. 
# * Redistributions in binary form must reproduce the above 
# copyright notice, this list of conditions and the following 
# disclaimer in the documentation and/or other materials provided 
# with the distribution. 
# * Neither the name of Code Aurora Forum, Inc. nor the names of its 
# contributors may be used to endorse or promote products derived 
# from this software without specific prior written permission. 

# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT 
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS 
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN 
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

#MTD-BSP-LC-uSD_and_eMMC_coexistence-00 *[ 
dev_mount ext_card /mnt/ext_card auto /devices/platform/msm_sdcc.1/mmc_host
dev_mount sdcard /mnt/sdcard 16 /devices/platform/msm_sdcc.3/mmc_host/mmc0 
#MTD-BSP-LC-uSD_and_eMMC_coexistence-00 *] 




może ktoś powiedzieć co mam zmienić???

Odnośnik do komentarza
Udostępnij na innych stronach

Spróbuj to, ale nie gwarantuję działania.
dev_mount sdcard /mnt/ext_card auto /devices/platform/msm_sdcc.1/mmc_host
dev_mount ext_card /mnt/sdcard 16 /devices/platform/msm_sdcc.3/mmc_host/mmc0 

Odnośnik do komentarza
Udostępnij na innych stronach

  • 4 tygodnie później...

Czesc czy moze mi ktos pomoc mam problem ze nie umie zmienic tego pliku Prosze o to zeby ktos mi powiedzial co mam zmienic i jak to jest moj vold fstab 

# Copyright (c) 2013, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above
#       copyright notice, this list of conditions and the following
#       disclaimer in the documentation and/or other materials provided
#       with the distribution.
#     * Neither the name of The Linux Foundation nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


dev_mount sdcard /storage/sdcard1 auto /devices/msm_sdcc.2/mmc_host

# MTP
#dev_mount sdcard2 /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.3/mmc_host
Jak to mam zmienic pomozcie prosze ;)

Odnośnik do komentarza
Udostępnij na innych stronach

dev_mount sdcard2 /storage/sdcard1 auto /devices/msm_sdcc.2/mmc_host

# MTP
#dev_mount sdcard /mnt/sdcard/external_sd auto /devices/platform/msm_sdcc.3/mmc_host

 

albo

 

dev_mount sdcard /storage/external_sd auto /devices/msm_sdcc.2/mmc_host

# MTP
#dev_mount sdcard2 /mnt/sdcard/sdcard1 auto /devices/platform/msm_sdcc.3/mmc_host

Odnośnik do komentarza
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.

Gość
Dodaj odpowiedź do tematu...

×   Wklejono zawartość z formatowaniem.   Przywróć formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić grafiki. Dodaj lub załącz grafiki z adresu URL.

×
×
  • Dodaj nową pozycję...

Powiadomienie o plikach cookie

Korzystając ze strony akceptujesz - Warunki użytkowania, Polityka prywatności